1. Work with product engineer and design engineer to define test coverage & methodology and develop test program for new products.
2. Cooperate with design engineer to debug new products and characterize circuit performance of digital/analog circuits.
3. Be responsible for test time reduction and test program maintenance & optimization after program releASed to production.
4. Cooperate with product engineer for the customer return analysis.

1. Deep sub-micron chip floor plan.
2. Support RTL to GDSII design flow.
3. CTS, Power plan, Placement & Routing, Timing closure, IR drop, Crosstalk, Antenna fix.
4. Full SoC chip DRC/LVS.

1. Bachelor degree or above, majored in micro-electronics, EE, Physics or relevant discipline.
2. 3+ years work experience in physical design, including a minimum 1-year PnR experience.
3. Tape-out experience is preferred.
4. Familiar with PnR tools such AS AStro or SocEncounter.
5. Familiar with Perl, Skill, TCL, ect.
6. Familiar with DC, PT is preferred.
7. Self motivated, good communication and team work skills.

1. MSEE or BSEE with 2+ years of related experience 2. Strong C and ASM programming background and experience
3. Strong Embedded system development experience, Linux platform is preferable
4. Strong Digital Signal Processing algorithm implementation background
5. Experience of multi-media system development, such AS MP3, AAC, WMA, MP4, AMR etc. codec is preferable.
6. Experience of Bluetooth system development experience is preferable.
7. Experience of digital audio, video or image processing is preferable.
8. Experience in DSP and ARM is preferable
9. Good interpersonal and communication skills, good team spirit and adaptability
10. Good English in reading and writing

1. Work with product engineer and design engineer to define test coverage & methodology and develop test program for new products.
2. Cooperate with design engineer to debug new products and characterize circuit performance of digital/analog circuits.
3. Analysis the test failure which related with software and hardware, give the feedback and suggestion to test development engr.

1. More than 2 years RF testing experience.
2. Knowledge in RF test and familiar with RF test equipment.
3. Self-motivated and strong responsibility.

BASed on the system design specification, candidate can conduct the investigation, simulation and comparison of the different DSP algorithms, propose the flexible solution to FPGA/ASIC group for implementation.

1. Strong DSP/Communication theory background.
2. Working experience in Wireless or Audio DSP system design and simulation.
3. MS or PhD degree in the related field.
4. Ability to solve the problem independently.
5. Some knowledge with FPGA/ASIC design is desirable.

1. Wireless and FM transceiver system modeling.
2. DSP algorithm design and simulation.
3. Support ASIC and FPGA design and implementation.

1. Bachelor degree or above, majored in EE or relevant disciplines.
2. Background in digital communication and wireless is preferred.
3. Familiar with Matlab is must; experience with C/C++ is plus.
4. Must be self-motivated and willing to accept the challenge.

1. Firmware development for Bluetooth.
2. ASsist hardware team to complete hardware debugging.
3. Constructing testing environment for SoC firmware.

1. BS degree or above major in CS or EE.
2. At leASt 2 year's experience in embedded software development.
3. Strong programming skills and knowledge in ASsembly language and C/C++.
4. Hands-on experience of device driver development.
5. Knowledge of ARM architecture, embedded OS and SoC architecture is a plus.

1. MSEE or BSEE with experience.
2. Good understanding of RF system, RF and analog IC.
3. Familiar with Cadence tools (or Agilent ADS).
4. Prefer RFIC block experience (LNA, Mixer, PLL, VCO, PA etc).

1. Responsible for design mixed-signal circuits for audio codec blocks and other projects.
2. TASks include spec definition, circuit and testing through all phASes of the product development.

1. MSEE/BSEE degree with 3+ years of experience in analog or mixed-signal IC development.
Hands-on design experience with CMOS mixed-voltage custom circuit designs.
2. Must possess strong intuitive and analytical understanding of transistor-level design and simulation.
3. Must understand placement and layout issues with respect to mixed-signal IC.

1.Make a scheme of FPGA prototype verification；
2.Understanding Application System；
3.Chip system understanding；
4.Module algorithm understanding；
5.Verification plan；
6.Top verification platform design；
7.System/module verification；
8.Report issues of development.

1.MSEE ASIC/FPGA design/verification with above 1 year work experience, or EE bachelor ASIC/FPGA design/verification with above 2 years work experience；
2.Familiar with EDA tool；
3.Familiar with FPGA development environment;
4.Familiar with VHDL / Verilog language；
5.Familiar using programming language C++ is preferred;(optional)
6.Excellent analysis and debugging skills.
7.Using scripting languages;(e.g. TCL, shell)

1. Bachelor+ degree in electronics, computer or equivalent discipline.
2. 2+ years working experience in audio processing.
3. Excellent at C language design and major DSP development language.
4. Excellent at digital signal processing principle, 2+ years DSP development experience.
5. Familiar with SBC, MP3, WMA audio Coding/Decoding principle and algorithm.
6. 1+ years experience in embedded system development.
7. Algorithm complexity analysis skill.